16 Camera PC-Based DVR
This system will allow up to 16 cameras. With 60 fps (frames per second) it meets most security needs. Just plug your cameras into the standard BNC connectors on the back of the video recorder and power it up! It's that easy.

Features:
Virtual Keyboard (allows full control of system without the keyboard)
Can operate all functions of DVR from remote site including viewing archives
Can view several DVRS on LAN from remote site at same time up to 8 cameras total
Audio support for 2 cameras (more optional)
System is password protected
Supports web remote viewing (logging on to IP address to view cameras from anywhere on internet)
Supports remote viewing from full functional client (Allows all dvr control from remote site)
Camera format resolution is 352 X 240 or 640 x 480
Motion detection, Round-the-Clock, or by Schedule recording mode
Send alarm / message to monitoring units or communication devices when it detects intruder

Specifications:
O/S - Windows
System CPU - 2.0 GIG Celeron
Memory - 256 SDRAM
Hard Drive - 120 GIG (larger optional)
Camera Input - 16 cameras
Display Output - 1, 4, 8, 9, 16 camera
Scanner Output - 16 cameras sequentially
Screen Display Rate - Time-lapse 60 channel divided among active cameras
Recording speed - 60 fps divided among recording cameras
Compression Format - M-Jpeg and Mpeg
Pan/Tilt/Zoom - Supports several manufacturers cameras
Compression - Adjustable on all cameras
Motion Detection - Supported on all cameras
Pre/post motion - From 4 frames pre to 500 frames post
Resolution - Adjustable on all cameras
Sensor Input - 4
Relay Output - 4
Networking - LAN, WAN, PSTN, ISDN
Virtual Keyboard
Watchdog - System will reboot if software has an error
Back-up Storage – Cd rom burner installed

System requirements:
Hard drive usage = An average of 2 gig per camera per day
You supply your own computer monitor

Back To Top

4 Camera Embedded DVR
Need a economical DVR system without all the bells and whistles? This embedded DVR system is quick plug and play. Just plug it in and it will start recording. You can view all the cameras at once or one at a time. Allows individual pictures to come up on play back or all together. Built in CD/RW for backup recording. The best feature is the ability to connect via a network and play back existing stored video or view images live.

This is a 60fps DVR. However, the image quality on these embedded DVRs is so good that it will look very close to real time. You can also reduce each frame down to 0.1 fps for weeks of recorded viewing. (Note: 0.1 fps will reduce image quality on playback.)

Use a security monitor or TV set to view cameras on unit.

Features:
• Four Channel Input
• Display In Quad or Single Image (Full MultiPlex)
• Motion Detection
• Built in CD Rom Reader/Writer
• Zoom in Live and Playback
• Web Interface TCP/IP With Client Software
• Full Remote Camera Controls (PTZ), Alarms, Wiper, Fans, Etc.
Specifications:
• Image Compression: JPEG
• Image Resolution: 720 X 480 or 360 X 240
• Recording Frame Rate: 60 FPS total
• Recording Modes: Real-time, time-lapse, event, motion
• Viewing/Monitoring Frame Rate: Real time viewing, 30 FPS per camera
• Number of sensor inputs: 4
• Number of alarm outputs: 1
• Remote Access: RS-232C, RS-485, TCP/IP
• PTZ support: Supports Pelco-D protocol
• Operating Temperature: 41F thru 104F
• Hard Drive: 120 GIG standard (optional 240gig total)
• Power: 12VDC 5A (Power Supply Included)
• I/R Remote Control Included
• Simplex (will not record while searching recorded images)
Includes 4 Color Cameras with 420 lines of resolution and 4 65ft plug and play cables.

Back To Top

Color Resi-Cam Camera
(RESI-60C)
This is our color weatherproof camera which is offered as an addition to the the RESI-600 system for the purpose of expanding the system to more than one camera. The camera features infrared LEDs which enhance viewing in low light conditions. An adjustable mounting bracket is included.

Back To Top

Resi-Cam Switcher
(RESI-10M)
This is our AV switcher that allows multiple camera operation for either B/W (RESI-200) or color Resi-Cam (RESI-600) systems. It allows expansion to a maximum of four cameras per system. It features adjustable switching modes that allow multi-location observation. It has a PIR sensor, which triggers a switch to the camera.

Back To Top